ODL 17069000R Guía de instalación descargar pdf (Pagina 6)

Angled Tube Installation

In the attic, if there are obstructions at the roof

location (valleys, wires, pipes, ducts, framing, etc.),

adjust tubes up to a combined 45° angle to ﬁnd a

path that avoids interference. Center the opening for

the tube between the framing members. Drive a nail

up into the roof deck and through the shingles.

Straight Tube Installation

In the attic, use a plumb line to nd a straight

location from the ceiling hole to the roof location.

Center the opening for the tube between the framing

members. Drive a nail up into the roof deck and

through the shingles.

Carpenter Pencil

Claw Hammer

Ladder

Measuring Tape

Phillips Screwdriver

Plumb Line

Safety Equipment

TOOLS & PARTS

Straight Tube Installation Angled Tube Installation

Dry-tting your tubing will help in determining

adjustablilty and need for additional extensions.

NOTE

Section-2

Locating The Roof Position

1 2 3 4 5 6 7 8 9 10 11 ... 62 63

Sin comentarios

ODL 17069000R Guía de instalación Pagina 6